XYH-C01 (ANSI:FR-4.0)
覆铜箔阻燃环氧玻纤布基层压板
特 点
■四官能环氧树脂专为更高的 UV-Blocking，更好的尺寸稳定性与通孔能力而设计。
■低吸水性、UV-block 与 AOI 兼容、阻燃达 UL 94-V0 级
■优良的耐热性能、机械性能、电性能、化学性能
■符合 IPC-4101/21 的规范要求
Features
■Tetra-functional epoxy is designed for a higher UV blocking, better dimensional stability and through
hole reliability
■Lower water absorption、UV Blocking and AOI compatible、UL 94 V-0
■Excellent Mechanical、electrical And Chemical Properties

■Meet the specification requirements of IPC-4101/21

一般性能 General Properties

Remarks 备注：
Typical Values For Reference only，Specimen Thickness：1.5mm 1/1
典型值只作参考，样品厚度：1.5mm 1/1
A=Keep the specimen originally without any process 保持原样，不作处理
C=Temperature and humidity conditioning 在恒温恒湿的空气中处理
D=Immersing in distilled water with temperature control 浸在恒温的水中处理
E=Temperature conditioning 在恒温的空气中处理

应用领域 Applications
■电脑、仪器仪表、通讯设备、汽车电子、电源等      ■ Computer, Instrument, Communication equipment,Automotive electronics, Power supplier

采购信息 Purchasing Information

备注
1)可根据客户要求提供其它尺寸和厚度；
2)以上图表仅供参考；
3)版本更新恕不另行通知。
Note
1)Other sheet size and thickness could be available upon request.
2)Speciality chart for reference only.
3)Version updates without notice.

基板存放与储存
■基板平放在干燥环境中.
■内层芯板棕化或黑化处理后如果在 24 小时内未进行压合需在 100-120℃条件下最小烘烤 1 小时才能进入下工序.
Laminate Handling and Storage
■Laminate should be stored in a dry environment and always stored flat.
■Inner layers should be baked for at least 1 hour 100-120℃,if inner layers are not used within 24 hours after black or
brown oxides treatment.