XYH-C01A(ANSI:FR-4.1)
无卤 0 TG150  环氧玻纤布 覆铜箔 基层压板
特 点
■不含卤素、锑、红磷等成分,废弃燃烧时不产生剧毒其他和残留有毒成份
■无铅兼容、阻燃达 UL 94-V0 级
■UV Blocking/AOI 兼容、高 CTI，CTI≥600V、高可靠性、高尺寸稳定性
Features
■Does not contain halogen, antimony, red phosphorus and other ingredients, waste combustion does not
produce toxic and other residual toxic ingredients
■Lead-free compatible, flame retardant up to UL 94-V0

■UV Blocking/AOI compatibility, high CTI, CTI ≥600V, high reliability, high dimensional stability

一般性能 General Properties

Remarks 备注：
Typical Values For Reference only，Specimen Thickness：1.5mm 1/1
典型值只作参考，样品厚度：1.5mm 1/1
A=Keep the specimen originally without any process 保持原样，不作处理
C=Temperature and humidity conditioning 在恒温恒湿的空气中处理
D=Immersing in distilled water with temperature control 浸在恒温的水中处理
E=Temperature conditioning 在恒温的空气中处理

应用领域 Applications
■消费电子、智能手机等      ■Consumer Electronics, smartphones, etc
采购信息                            Purchasing Information

备注
1)可根据客户要求提供其它尺寸和厚度；
2)以上图表仅供参考；
3)版本更新恕不另行通知。
Note
1)Other sheet size and thickness could be available upon request.
2)Speciality chart for reference only.
3)Version updates without notice.

基板存放与储存
■基板平放在干燥环境中.
■内层芯板棕化或黑化处理后如果在 24 小时内未进行压合需在 100-120℃条件下最小烘烤 1 小时才能进入下工序. 
Laminate Handling and Storage
■Laminate should be stored in a dry environment and always stored flat.
■Inner layers should be baked for at least 1 hour 100-120℃,if inner layers are not used within 24 hours after black or
brown oxides treatment.